Konftel Knowledge Base
Find the answers you are looking for in our extensive knowledge base.
Konftel IP DECT 10 Support
Anmäl dig till vårt nyhetsbrev för att få veta när det finns en ny mjukvara till dina produkter.
PrenumereraVideo
Konftel Wireless IP with IP DECT 10 and Konftel 300Wx
Learn how to set up the Konftel IP DECT 10 and Konftel 300Wx.
Titta på filmenFAQs
Bläddra i kategorierna för att hitta svaret du behöver
Set up
Mjukvaruuppgradering
Så installerar du den senaste versionen
Konftel IP DECT 10 v. 5.00 B01
2020-05-18
If you have issues with outgoing calls with this release after upgrade from 3.55 version, please do a base defaults and re-register Konftel 300Wx to the base and test again.
Make sure you are using DECT version 937 or later on Konftel 300Wx before you upgrade Konftel IP DECT 10 to this version. Check MENU > STATUS > DECT version before upgrade.
Visa ändringslogg
Make sure you are using DECT version 937 or later on Konftel 300Wx before you upgrade Konftel IP DECT 10 to this version. Check MENU > STATUS > DECT version before upgrade.
- Improve stability when having music-on-hold (MOH)
- Trigger a reboot if "Configuration Server Address" is changed
- Add ring delay with incoming call rining to Call group
- Improve TCP/TLS stability (heapleak)
- Fix stability issue when doing transfer
Uppgradera din Konftel IP DECT 10
Uppgradera via webbgränssnittet
- Log in to the web interface of the IP DECT 10.
(You can find the IP address in MENU > STATUS of the Konftel 300Wx) - Click on "Firmware Update" and enter the following values:
Firmware update server address = http://upgrade.konftel.com
Firmware path = /Download/konftel_ip_dect_10
Required version = eg. 355 for version 3.55
Required branch = eg. 22 for branch 22 (required only if version is same as on IP DECT 10)
- Click on “Save/Start update” to proceed with the upgrade.
- LEDs will flash red during upgrade and turn green when done.
- Log in to IP DECT 10 and check firmware version on status page.
